DSPC-3T01: TMS320F2812 Kit

Last Updated on Friday, 28 October 2011 12:53 Written by TruongTrongToai Friday, 28 October 2011 01:33

Overview

The TMS320F2812 Kit provides the easiest and lowest cost method to experience the  32 bit real-time C2000 microcontroller for the first time.

Specifications

• Three push-button switches for user-defined inputs
• A variable resistor for analog input
• Three user-defined indicator LEDs
• Connector for connecting various expansion boards
• USB to RS232 converter
• CAN communication

PMC-3T01: PIC32 Starter Kit

Last Updated on Friday, 28 October 2011 12:39 Written by TruongTrongToai Thursday, 27 October 2011 15:23

Overview

The PIC32 Starter Kit provides the easiest and lowest cost method to experience the PIC32 microcontroller for the first time.

Specifications

• Integrated PICkit 2 programmer
• Three push-button switches for user-defined inputs
• Three user-defined indicator LEDs
• Connector for connecting various expansion boards
• USB OTG & USB Devices

DCS3T-24: H-Bridge Board using LM18200

Last Updated on Thursday, 27 October 2011 15:32 Written by TruongTrongToai Thursday, 27 October 2011 13:10

Overview

The LMD18200 is a 3A H-Bridge designed for motion control applications

Specifications

• Delivers up to 3A continuous output
• Operates at supply voltage up to 55V
• Low Rds(ON) typically 0.33 Om per switch at 3A 

USB-3T01: Multifunction Data Acquisition Module

Last Updated on Thursday, 27 October 2011 12:57 Written by TruongTrongToai Saturday, 27 August 2011 15:52

Low-Cost  Multifunction Data Acquisition Module

Specifications

• 6 analog inputs (10-bit, 5 kS/s)
• 2 pwm outputs (16-bit )
• 8 digital I/O
• 1 counter( 32-bit)
• 1 encoder 16 bit
• Full-Speed USB interface (12 Mbit/s)
• Bus-powered USB for high mobility

DCS3T-23: DC Servo Driver for Motor Control Experiment

Last Updated on Saturday, 13 August 2011 13:58 Written by TruongTrongToai Saturday, 13 August 2011 03:37

Overview

This is DC Servo Driver 24V, 15A for motor control experiment, it can suitable with a lot of DC Servo types. This product is designed with a lot of function and high accuracy, you can apply any control algorithm. And a CD disc is attached with several samples such as Led, Buzzer, Button, Adc, Lcd, Timer, Interrupt, Uart, Pwm, Qei, and CAN

Specifications

• Operating voltage: 24V DC
• Rated current 5A, peak (10sec.) 20A
• RS232 and CAN communication
• Encoder connection ( Single-ended & differential)
• Current measurement
• LCD
• Leds, Buttons, Variable Resistor
• Protection against over current

ACS3T- 61: AC Servo Driver

Last Updated on Saturday, 13 August 2011 02:53 Written by TruongTrongToai Friday, 12 August 2011 13:15

Overview

Specifications

• Rated motor output: 500W
• Input power: single-phase 200 - 240V or 3-phase 380 - 480V, 50/60Hz
• Rated current 10A, peak (10sec.)20A
• Control mode: position & speed
• RS232 and CAN communication
• Input signals: via high speed optocouppler 5V and 24V
• Protection against overload, over-voltage, over current, short circuit
• Custom software design for special movement

IVT3T- 52 : Inverter 0.2-1.5 kW

Last Updated on Saturday, 13 August 2011 03:52 Written by TruongTrongToai Friday, 12 August 2011 12:37

Overview

Specifications

• Output range: 0.2 - 1.5 kW
• Power supply (50/60 Hz):  3-phase 380 - 480V
• Output frequency: 0.2 - 200 Hz
• Setting parameters via DIP-switch
• Overload and short circuit protection
• RS232 and CAN communication
• Input signals: via high speed optocouppler 5V and 24V

IVT3T- 51 : Inverter 0.2-1.5 kW

Last Updated on Saturday, 13 August 2011 03:04 Written by TruongTrongToai Friday, 12 August 2011 10:30

Overview

Specifications

• Output range: 0.2 - 1.5 kW
• Power supply (50/60 Hz): Single-phase 200 - 240 V
• Output frequency: 0.2 - 200 Hz
• Setting parameters via DIP-switch
• Overload and short circuit protection
• RS232 and CAN communication
• Input signals: via high speed optocouppler 5V and 24V

VSS3T-41: Voice & Sound Module with SD Card Socket

Last Updated on Friday, 16 December 2011 13:36 Written by TruongTrongToai Thursday, 11 August 2011 12:44

Overview

Specifications

• Easy to use memory card interface
• Plays MP3, PCM WAV, and IMA ADPCM WAV files
• Support plug-in maximum of 2G byte SD card
• Support to play any section of voice directly
• Only change the voice content in SD card, the purpose of updating voice can be reached

SSC3T-33: Stepper Speed Controller

Last Updated on Thursday, 11 August 2011 13:01 Written by TruongTrongToai Wednesday, 10 August 2011 15:34

Overview

Specifications

• Operating voltage: 5V DC
• Linear speed control (Control of acceleration, deceleration, max speed and number of steps to move)
• Home sensor & Limit sensor
• Step frequency: 0 to 40 kHz
• RS232 communication

SMC3T-32: Small Stepper Motor Driver

Last Updated on Friday, 12 August 2011 10:36 Written by TruongTrongToai Saturday, 06 August 2011 15:41

Overview

Specifications

• Operating voltage: 24 to 48V DC
• Max phase current: 0.4 to 2A/ Phase (up to 3A with fan ) via DIP-switch
• Operating mode: Full-(1/1), 1/2, 1/4, 1/5, 1/8, 1/10, 1/15, 1/16, 1/20
• Step setting: via DIP-switch
• Step frequency: 0 to 75 kHz
• Current down: automatically to 40%
• RS232 and CAN communication

SMC3T-31: Small Stepper Motor Driver

Last Updated on Friday, 12 August 2011 13:33 Written by TruongTrongToai Saturday, 06 August 2011 15:03

Overview

Specifications

• Operating voltage: 24 to 48V DC
• Max phase current: 0.4 to 2A/ Phase (up to 3A with fan ) via DIP-switch 
• Operating mode: Full-(1/1), 1/2, 1/4, 1/5, 1/8, 1/10, 1/15, 1/16, 1/20
• Step setting: via DIP-switch
• Step frequency: 0 to 75 kHz
• Current down: automatically to 40%
• Input signals: via high speed optocouppler 5V and 24V

DCS3T-22: Small DC Servo Control Development Board

Last Updated on Saturday, 13 August 2011 03:08 Written by TruongTrongToai Saturday, 06 August 2011 06:16

Overview

Specifications

• Power supply 24 - 48 VDC
• Controller using dsPIC30f4012
• 3A, 55V H-Bridge
• H-Bridge using LMD18200 with 3A, 55V
• RS232 and CAN communication
• Control mode setting via DIP-switch
• Protection to overcurrent, short-circuit
• Encoder and current sensing interface

DCS3T-21: Small DC Servo Control Development Board

Last Updated on Thursday, 27 October 2011 13:20 Written by TruongTrongToai Saturday, 06 August 2011 03:26

Overview

Specifications

• Power supply 24 - 48 VDC
• Controller using dsPIC30f4012
• 3A, 55V H-Bridge
• H-Bridge using LMD18200 with 3A, 55V 
• Enable/ Dir/ Pulse Input using high speed optocoupler
• Control mode setting via DIP-switch
• Protection to overcurrent, short-circuit
• Encoder and current sensing interface

USB-3T13 Motion Control & Multifunction Data Acquisition Module

Last Updated on Thursday, 27 October 2011 12:07 Written by TruongTrongToai Tuesday, 26 July 2011 15:14

Motion Control & Multifunction Data Acquisition Module

Specifications

• 1 DC servo motor motion controller (position, velocity, and current control )
• 1 stepper motor motion controller (position, velocity, and acceleration control )
• 4 analog inputs for measuring DC voltages in the range of 0-5V  (10-bit, 5 kS/s)
• 2 analog inputs for measuring DC currents in the range of 4-20mA  (10-bit, 5 kS/s )
• 4 PWM outputs (16-bit )
• 12 digital I/O
• 3 counter( 32-bit)
• 1 capture( 16-bit)
• 250 bytes EEPROM reserved for user data
• 1 encoder module ( absolute and incremental encoder)
• Full-Speed USB interface (12 Mbit/s)
• Bus-powered USB for high mobility
• USB overcurrent protection
• The driver adapts itself automatically to support each device connected.

USB-3T12 Multifunction Data Acquisition Module

Last Updated on Monday, 07 November 2011 13:52 Written by TruongTrongToai Tuesday, 26 July 2011 12:21

Standard  Multifunction Data Acquisition Module

Specifications

• 4 analog inputs for measuring DC voltages in the range of 0-5V  (10-bit, 5 kS/s)
• 2 analog inputs for measuring DC currents in the range of 4-20mA  (10-bit, 5 kS/s)
• 4 PWM outputs (16-bit )
• 12 digital I/O
• 3 counter( 32-bit)
• 1 capture( 16-bit)
• 1 encoder module ( absolute and incremental encoder)
• Full-Speed USB interface (12 Mbit/s)
• Bus-powered USB for high mobility
• USB overcurrent protection
• The driver adapts itself automatically to support each device connected.

USB-3T11 Multifunction Data Acquisition Module

Last Updated on Friday, 11 November 2011 11:19 Written by TruongTrongToai Monday, 25 July 2011 15:18

Low-Cost  Multifunction Data Acquisition Module

Specifications

A4983 Stepper Motor Driver Carrier

Last Updated on Sunday, 27 March 2011 04:35 Written by TruongTrongToai Sunday, 27 March 2011 03:54

Product Information

The A4983 stepper motor driver carrier is a breakout board from Pololu for Allegro’s easy-to-use A4983 microstepping bipolar stepper motor driver. The driver features adjustable current limiting and five different microstep resolutions. The driver operates from a supply of 8 – 35 V and can deliver up to 2 A per coil.

Power HD High-Speed Digital Sub-Micro Servo DSP33

Last Updated on Sunday, 27 March 2011 04:36 Written by TruongTrongToai Saturday, 22 January 2011 09:21

Product Information

The DSP33 from Power HD is a very fast sub-micro servo with digital control electronics for increased performance. At just 3 g, it is one of the smallest and lightest sub-micro servos we carry, making it a great tiny actuator for robot mechanisms that need to be quick and very light. This servo features a light, 3"-long cable terminated by a special 1.5mm-pitch connector intended for very small RC receivers. Servo horns and associated hardware are included.

Shaftless Vibration Motor 10x3.4mm

Last Updated on Sunday, 27 March 2011 04:37 Written by TruongTrongToai Wednesday, 19 January 2011 17:38

Product Information

Overview

This shaftless vibration motor is fully-enclosed with no exposed moving parts. Its small size (10 mm diameter, 3.4 mm height) and shaftless design mean you can mount it on a PCB or even place it in a pocket to add quiet, haptic feedback to your project. The motor has a 3M adhesive backing on it for easy mounting and 1.5" leads for making quick connections. Polarity is not important; the motor can run CW or CCW.