USB-3T01: Multifunction Data Acquisition Module
Last Updated on Thursday, 27 October 2011 12:57 Written by TruongTrongToai Saturday, 27 August 2011 15:52
Low-Cost Multifunction Data Acquisition Module
Specifications
- 6 analog inputs (10-bit, 5 kS/s)
- 2 pwm outputs (16-bit )
- 8 digital I/O
- 1 counter( 32-bit)
- 1 encoder 16 bit
- Full-Speed USB interface (12 Mbit/s)
- Bus-powered USB for high mobility
USB-3T13 Motion Control & Multifunction Data Acquisition Module
Last Updated on Thursday, 27 October 2011 12:07 Written by TruongTrongToai Tuesday, 26 July 2011 15:14
Motion Control & Multifunction Data Acquisition Module
Specifications
- 1 DC servo motor motion controller (position, velocity, and current control )
- 1 stepper motor motion controller (position, velocity, and acceleration control )
- 4 analog inputs for measuring DC voltages in the range of 0-5V (10-bit, 5 kS/s)
- 2 analog inputs for measuring DC currents in the range of 4-20mA (10-bit, 5 kS/s )
- 4 PWM outputs (16-bit )
- 12 digital I/O
- 3 counter( 32-bit)
- 1 capture( 16-bit)
- 250 bytes EEPROM reserved for user data
- 1 encoder module ( absolute and incremental encoder)
- Full-Speed USB interface (12 Mbit/s)
- Bus-powered USB for high mobility
- USB overcurrent protection
- The driver adapts itself automatically to support each device connected.
USB-3T12 Multifunction Data Acquisition Module
Last Updated on Monday, 07 November 2011 13:52 Written by TruongTrongToai Tuesday, 26 July 2011 12:21
Standard Multifunction Data Acquisition Module
Specifications
- 4 analog inputs for measuring DC voltages in the range of 0-5V (10-bit, 5 kS/s)
- 2 analog inputs for measuring DC currents in the range of 4-20mA (10-bit, 5 kS/s)
- 4 PWM outputs (16-bit )
- 12 digital I/O
- 3 counter( 32-bit)
- 1 capture( 16-bit)
- 1 encoder module ( absolute and incremental encoder)
- Full-Speed USB interface (12 Mbit/s)
- Bus-powered USB for high mobility
- USB overcurrent protection
- The driver adapts itself automatically to support each device connected.
USB-3T11 Multifunction Data Acquisition Module
Last Updated on Friday, 11 November 2011 11:19 Written by TruongTrongToai Monday, 25 July 2011 15:18
Low-Cost Multifunction Data Acquisition Module
Specifications
- 4 analog inputs for measuring DC voltages in the range of 0-5V (10-bit, 5 kS/s)
- 2 analog inputs for measuring DC currents in the range of 4-20mA (10-bit, 5 kS/s)
- 2 pwm outputs (16-bit )
- 12 digital I/O
- 1 counter( 32-bit)
- 1 capture( 16-bit)
- Full-Speed USB interface (12 Mbit/s)
- Bus-powered USB for high mobility
- USB overcurrent protection
- The driver adapts itself automatically to support each device connected.